AN12 w/18mm Barb Connector Fill-A-Buddy Fueling Option
Free sample
- Satisfaction guarantee
- money-back guarantee
- Safe payment
- lower customzied cost
- ISO9001-2007
we would like to ask your something
1 Affordability : Since 3D printing uses only the required material and needs no tooling, it is one of the most affordable manufacturing processes for one-off parts or small batches.
2 geometries: trongse 3D printers create parts layer by layer using a computer-controlled nozzle, they can be used to create highly complex shapes, including complex interior geometries.
3 Efficiency : Once a part has been designed using CAD software, it can be printed in a matter of hours, without a lengthy setup procedure.
4 Adaptability: Because 3D printed parts require no tooling, there is less risk involved when creating a part. If a fault is discovered after printing, it can be amended digitally without the need to replace expensive tooling.
5 Environmental factors : Although 3D printers require power to operate, there is generally no material wastage involved. Subtractive processes like machining, on the other hand, produce waste material.
Description
AN12 w/18mm Barb Connector.
- Male & Female 6-AN Quick Disconnect Fittings
- Female -AN Quick Disconnect Fittings
- 6Ft -6n Fuel Line
This is an easy way to add the option to use your accessory fuel tank to fill a 2nd car. We use a -6an Push Lock style quick disconnect fuel fitting system that is leak proof when disconnected to allow you to quickly reconnect your supplied Fill-A-Buddy line. This system takes less than 20 seconds to disconnect and re-connect to the supplied line and start filling a 2nd vehicle. This can be installed anywhere you have easy access to fuel line and is universal for all RPM fuel tank systems.
